Workplace hazards 1. The first step in preventing hazards is to identify them and the first step in identifying the hazards is to develop a plan that can be implemented and followed consistently.
Step 2 – Assess risks.
How to identify possible hazards in the workplace. Existing Information Information that may already be available can help to highlight the hazards and risks associated with features in your workplace. While there are various methods to identify hazards in the workplace the following three will help you begin the process of creating an effective IIPP. Walk through the worksite and visually assess the types of equipment work practices and any potential hazards that could be harmful to workers.
Look at all aspects of the work and include non-routine activities such as maintenance repair or cleaning. Cigarettes matches and lighters. Identify and find things which have the potential to cause harm these can include.
It should be planned systematic and cover all reasonably foreseeable hazards and associated risks. Biological hazards – Bacteria viruses animals other humans. Include how the tasks are done.
Smokers material eg. Below are some common risks for people working in various national industries. Conduct regular worksite inspections.
Look at the physical work environment equipment materials products etc. This may seem silly but tripping is one of the main causes of injury in the workplace. It may help to work as a team and include both people familiar with the work area as well as people who are not this way you have both the experienced and fresh eye to conduct the inspection.
Ergonomic hazards – Repetitive movements incorrect posture incorrect set up of work environment. Find out what could cause harm. Workplace hazards vary based on the nature of each workplace.
Slips trips and falls. Overall the goal of hazard identification is to find and record possible hazards that may be present in your workplace. Detailed information is in Chapter 2 how to identify hazards.
Chemical hazards – Hazards stemming from any hazardous chemical. The risk assessment process should be used to identify hazards in your work activity and to evaluate the control measures that you have in place to manage these risks. The four steps for managing WHS risks are.
Step 1 – Identify hazards. To give you an insight into how work is being managed and workers are being asked to undertake an activity. DEFINITIONS OF HAZARDS Anything or condition with the potential to cause harm The potential of a substance person activity or process to cause harm injury or illness Anything materialsubstance machine methods or matters in the workplace that has the potential to cause harm.
WORKPLACE HAZARDS PREPARED BY. Look for cords stretched across floors rugs that are loose or have corners that stick up or low steps that are not marked. Steps to help avoid potential tragedies caused by common hazards include providing appropriate employee training and equipment and instilling a positive culture of safety.
These sources could include. Look at injury and incident records. The aim is to ensure that your activities are carried out without risks to the health and safety of your employees and others.
You know this is of course a pretty obvious one. Things to look out for during hazard identification. Check for slipping and tripping hazards.
Number 8 then to help you identify hazards is just looking at your operational procedures and method statements or work instructions. Hazards frequently identified by the consultants include tasks related to working at height chemicals housekeeping electrical forklifts lockouttagout and confined spaces. Knowing the common risks for people working in your industry will help you identify hazards in the workplace.
Identify sources of ignition You can identify the potential ignition sources in your premises by looking for possible sources of heat which could get hot enough to ignite material found in your premises.