Laboratory Hazards Safety. Common hazards in the laboratory include.
Hazards in the laboratory fall into three general categories.
What are the hazards in a laboratory. In cases where substances with significant or unusual potential physical hazards are involved consult more detailed references such as Urben 2007 and other sources discussed in section 4B of this chapter. Make sure you are aware of where your labs exits and fire alarms are located. Consult an up-to-date laboratory chemical safety summary material safety data sheet or NIOSH Pocket Guide to Chemical Hazards HHSCDCNIOSH 2007.
Location of safety showers eyewash stations fire extinguishers and emergency exits. Safety rules in the laboratory are all the more crucial especially now that we are in the midst of the pandemic. Many operations in the lab can result in lab workers assuming sustained or repetitive awkward postures.
It is the responsibility of each person in the lab to know and follow basic laboratory safety rules to understand how to safely operate equipment understand the hazards of materials they are working with and to work to reduce potential risks. Ideally all of the electrical circuits in a science laboratory should include ground fault circuit interrupters GFCIs which are designed to protect people from electrical hazards. No waste is to be left or placed in the sinks and under no.
Chemical Substances which in contact with water emit flammable gases Physical Hazard Substances that in contact with water emit flammable gases are solids or liquids which by interaction with water are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities. Included here are electrical safety hazards ergonomic hazards associated with manual material handling and equipment use handling sharps and basic housekeeping issues. Research facilities inherently have significant physical hazards present.
We have quality indicators that we set and review regularly which include monitoring the time it takes us to report results for urgent medical tests and ensuring such results are reported within stated timeframes. A wide variety of equipment is used for different activities. A laboratory is a place bound by rules to ensure the safety of everyone.
A biotechnology lab may have several safety hazards that must be known and understood by all students or employees working in the lab. When dangerous chemicals arent handled in a safe and compliant manner they can cause a number of health hazards. Most of the equipment is delicate sensitive and expensive.
Electrical fires are another common laboratory hazard which can occur when incorrect or unsafe cords and plugs are used. The people working in the laboratory must know the various types of hazards in the laboratory and know the possible precautions to avoid those accidents. The clinical laboratory has various types of safety hazards.
It can cause electric shock electrocution burns fires and even explosions. Open flames should never be used in the laboratory unless you have permission from a qualified supervisor. Be aware of the safety facilities of the laboratory ie.
Working spaces are to be kept clean. Broken glass sharps and laboratory waste must be placed in the marked bins in the laboratory. Some of these may be very dangerous and life-threatening.
If there is an accident or emergency situation involving these hazards. A major hazard in the laboratory is the risks presented by the dangerous properties of hazardous chemicals. Lab areas containing carcinogens radioisotopes biohazards and lasers should be properly marked with the appropriate warning signs.
These complications include burns eye injuries lung disease asphyxiation and suffocation. Electricity has long been recognized as hazardous. There are precautions to observe and safety measures to follow.
Animal biological chemical physical and radiological. Our laboratory is currently accredited under ISO15189 standards many of which impact patient safety. Part of my role is to review ongoing compliance.
Before you use any equipment you must learn about its operation and its safety implications. Any electrical appliances used in the laboratory should be fit for purpose up-to-date and correspond to connected devices before they are implemented.