If your chemical container is not color coded check the SDS Hazards Identification section in the SDS. The NFPA color codes are part of the NFPA 704 standard for the identification of hazardous materials.
Use of the ORGANIC PEROXIDE label eliminates the need for a flammable liquid subsidiary label.
What do the colors represent on a chemical hazard label. Most chemical suppliers use white for contact hazard. The numbers indicate the degree of a particular hazard. Therefore the red frame is required regardless of whether the shipment is domestic or international.
The white field is. The four bars are color coded using the modern color bar symbols with blue indicating the level of health hazard red for flammability orange for a physical hazard and white for Personal Protection. Blue red yellow and white.
Health Health Severe Health Hazard 4. On every NFPA label there should be a number from zero to four inside the blue red and yellow areas. The blue red and yellow fieldswhich represent health hazard flammability and reactivity respectivelyuse a numbering scale ranging from 0 to 4.
Chemicals with labels that are colored and striped may react with other chemicals in the same hazard class. The color of the border must be black and the color of the flame may be black or white. Example NFPA labels are color-coded.
The color red naturally attracts the eye above all other colors. Many chemicals come with the color code already on the label. OSHA believes that the use of the red frame will increase recognition and comprehensibility.
Each color on the label represents a different type of hazard. All of the companies use the color red for flammability blue for health and yellow for reactivity as taken from the National Fire Protection Association NFPA color code system. What these colors represent must be remembered first.
No pictograms must have red borders. BS5609 Section 3 GHS Chemical Labels Explained BS5609 Section 3 requires the fully printed label to meet or exceed certain standards for abrasion resistance and permanence of print. A value of 0 means that the material poses essentially no hazard whereas a rating of 4 indicates extreme danger.
When must label information be updated. Some chemical containers have labels already color coded for the hazard. These color codes help emergency responders know about potential health fire and chemical instability issues.
For example acids white and bases white with black diagonal stripes should be stored separately. The ORGANIC PEROXIDE label 172427 indicates that organic peroxides are highly flammable. If the chemical does not cause chronic health problems and the label is set up in this format a slash mark will be found in the first box such as this.
Those that do not will have hazard information listed on the label. These are chemicals that may cause life-threatening permanent or major injury from a. On top of the color coding NFPA also uses a numbering system.
Read the label carefully. Colors for general storage conditions and unusual requirements will vary between manufacturers. See the Material Safety Data Sheet MSDS for more information.
Section 2 certified GHS chemical labels mean the label material itself before any printing is compliant with BS5609 Section 2 standards. The NFPA 704 diamond sign used to display this information has four colored sections. Many suppliers use a color coding system for chemical storage classification.