For more details on the exact specifications please refer to the Standard. ANSI Type R or P Class 2 – Performance Class 2 is considered the minimum level of protection for workers exposed to roadway rights-of-way and temporary traffic control TTC zones.
Class 2 vests include signficantly.
What is class 2 safety vest standards. Provides moderate body coverage and superior visibility and more coverage than Class 1 Apparel has full coverage of the upper torso front back sides and over the shoulders and includes bib-style overalls. These safety vests are required for workers near traffic between 25-50 mph heavy machinery inclement weather and low visibility conditions. The vest must contain at least 215 yards of 2-inch trim 31 yards if the trim measures 1372 inches in width or 43 yards if 1-inch trim is used.
A person designated by the employer to be responsible for worker safety. OSHA Safety Vest Classifications ANSI Class 2 Safety Vests. Class 2 Designed for areas where the traffic does not exceed 50 MPH.
Class 2 Safety Vests meet ANSI 107-2010 revision to the 107-2004 high visibility standard which states all workers who are within the public right-of-way of Federal. Potential bad weather vehicle or equipment speeds that exceed 25 mph tasks that take attention away from traffic andor activities that take place close to traffic. Law enforcement personnel and field engineers generally wear Class 2 vests.
Class 2 or 3 requirements of the ANSIISEA 1072004 publication entitled American National Standard for High-Visibility Safety Ap-parel and Headwear or equivalent revisions and labeled as meeting the ANSI 107-2004 standard performance for Class 2 or 3 risk exposure. Garments will have additional amounts of high visibility materials that allow for. Stripesbands are composed of retroreflective or combined performance materials.
Details for each of the classes are listed below. ANSI class 2 vests are the most commonly required safety vests. Airport ground crews law enforcement railway workers school crossing guards and toll gate personnel among others.
Class 2 safety vests are required by law for anyone working near or exposed to vehicle traffic exceeding speeds of 25 mph. A Class 2 vest must have at least 775 inches of safety yellow or safety orange back ground material and 201 square inches of reflective striping. A Class 2 garment must have a minimum of 8375 linear feet of 2 reflective tape or 122 linear feet of 1 38 reflective tape and at least 775 in2 of high-visibility background material.
You can also find ANSI class 2. Class 2 provides moderate body coverage and superior visibility. Class 3 provides the greatest body coverage and visibility under poor light conditions and at great distance.
ANSI Class II Vests – Class II garments worn are for workers who need greater visibility due to these factors. Class 3 ANSI Safety Vest. Class 2 safety vests are required for workers in construction utilities surveying forestry school crossing guards airport baggage control and parking lots.
Examples of people who would use ANSI Class 2 safety vests may include road construction crews utility workers survey crews. Class two vests can only use reflective trim. As a general rule this includes most roadways but excludes highways.
These ANSI safety vests are commonly worn by survey crews airport baggage handlers and school crossing guards.